1. Product introduction
The belt conveyor produced by Weifang Luton Machinery Electronic Co., Ltd. can be widely used in various industries such as mines, ports, metallurgy, cement, etc. It is a continuous and efficient material conveying equipment. The belt conveyors are divided into two types: ordinary belt conveyors and large inclination belt conveyors.Ordinary belt conveyors designed and produced by our company generally can only transport materials at slopes below 18°, and are the most widely used. The max angle design of the large inclination belt conveyor can reach 38°, and the applied angle is 33°. This type of belt conveyor is energy-saving and environmentally friendly, has high conveying efficiency, safe and reliable operation, and can save a lot of costs for customers.
2. Application
Belt conveyors are widely used in bulk materials such as power plants, cement plants, coal mines, docks, iron ore, steel plants, chemical plants, pulp plants and coal preparation plants.
3. Types of materials to be transported
Bulk materials such as raw coal, limestone, lime paste, iron ore, and clean coal.
一、產品簡介
濰坊市路通機械電子有限公司生產的運帶式輸送機可廣泛應用于礦山、港口、冶金、水泥等多種行業領域，是一種連續高效的物料輸送設備。帶式輸送機分為兩種類型：普通帶式輸送機和大傾角帶式輸送機。
我公司設計生產的普通帶式輸送機一般只能在傾角18°以下的坡度下輸送物料，應用最為廣泛。大傾角運帶式輸送機**角度設計可達到38°，已實現應用的角度為33°。該類帶式輸送機節能環保，輸送效率高，運行安全可靠，能為企業節省大量成本。
二、應用范圍
電廠，水泥廠，煤礦，碼頭，鐵礦，鋼鐵廠，化工廠，紙漿廠和選煤廠等散裝物料的運輸。
三、運輸物料
原煤，石灰石，石灰膏，鐵礦石，精煤等散裝物料。
Advantages of belt conveyor
（1）The soft-start device and disc brake device are adopted to realize the heavy-duty and reliable stop of the belt conveyor, with good stability and reliability.
（2）It adopts a low-speed torque-limiting backstop or low-speed backstop, which is directly installed on the shaft extension of the transmission drum or the low-speed shaft extension of the reducer. It has a strong anti-reverse ability and can ensure the belt conveyor stop working under any working conditions with safety and reliability.
（3）Use multiple cleaners to solve the problem of cleaning pattern belts. Ordinary cleaning devices cannot meet the requirements for the use of patterned belts. For this, we adopt a 2-level cleaner on the surface of the bearing tape. The first is a spring scraper cleaner, and the second is a roller brush cleaner. The spring scraper cleaner is used to clean the coal adhered to the surface of the tape, and the rolling brush cleaner is used to clean the coal powder on the surface of the tape and the groove. The roller brush cleaning device uses an independent motor to drive the roller brush to rotate. One unloading roller device is installed at the front and rear, and the rotation direction is opposite to the running direction of the conveyor belt, and the cleaning effect is ideal.
（4）Use energy-saving rollers, scientific structure design, low resistance, long life and energy saving.
產品優勢
（1）采用軟起動裝置和盤式制動器裝置，實現了皮帶機的重載可靠停車，穩定性好，可靠性好。
（2）采用低速限矩型逆止器或低速逆止器，直接安裝在傳動滾筒軸伸或減速器低速軸軸伸上，具有強大的抗逆轉能力，可保證帶式輸送機在任何工況下安全可靠停車。
（3）采用多重清掃器，解決花紋帶的清掃難題。普通清掃裝置無法滿足花紋帶的使用要求，為此在承載膠帶帶面設有2級清掃器，第1級為彈簧刮板清掃器，第2級為滾刷清掃器。彈簧刮板清掃器用于清掃粘結在膠帶表面的煤，滾刷清掃器用于清掃膠帶表面及凹槽里的煤粉。滾刷清掃裝置采用獨立電動機驅動滾刷旋轉。卸載滾筒裝置前后各設置1臺，旋轉方向與輸送帶運行方向相反，清掃效果理想。
（4）使用節能托輥、結構優化設計，阻力小，壽命長，節能。
Product structure and technical parameters
The belt conveyor is a continuous conveying device that uses a conveyor belt as a traction and load-bearing component, and conveys materials through the movement of the load-bearing material conveyor belt.
The main mechanical parts of the belt conveyor:
1. Conveyor belt (to form a circular transportation system);
2. Roller: used for a belt change and transmission;
3. Roller: used to support the tape;
4. Drive device (motor, reducer, starting brake equipment, backstop, etc.): drive the belt to run with materials;
5. Steel structure: frame, middle frame, outrigger, roller group, etc. provide equipment support;
6. Tension device: Provide initial tension to ensure that the conveyor belt can transmit friction;
7. Auxiliary equipment: feeding device, unloading device, cleaner, safety protection device, belt turning device, maintenance platform, etc.
產品結構與技術參數
帶式輸送機是以是以輸送帶作牽引和承載構件，通過承載物料輸送帶的運動進行物料輸送的連續輸送設備。
輸送機的主要機械組成部分：
1、輸送帶（組成環形運輸系統）；
2、滾筒：用于膠帶變向及傳動；
3、托輥：用于支撐膠帶；
4、驅動單元（電機、減速機、起制動設備、逆止器等）：驅動膠帶帶動物料運行；
5、鋼結構部分：機架、中間架、支腿、托輥組等提供設備支撐；
6、張緊單元：提供初始張力保證輸送帶能傳遞摩擦力；
7、附屬設備：給料裝置、卸料裝置、清掃器、安全防護裝置等，特殊的還需要翻帶裝置、檢修平臺等。
北方路通 彰顯實力 歡迎考察咨詢！
EN